Browsing this Thread:
1 Anonymous Users
how to configure TBCT |
||
|---|---|---|
|
Just popping in
![]()
Joined:
2007/2/23 14:41 Group:
Registered Users Posts:
4
Level : 1; EXP : 21
HP : 0 / 5 MP : 1 / 56 ![]() |
Hello,
I'm trying to enable the TBCT feature in my lab and even if I configure the TBCT in the Gateway it does not work. DO I nned to create a TCL or VXML script. If so were to I place that script and how is it invoke from a Dialpeer point of vue. here is my show run: Building configuration... Current configuration : 8021 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname MODVCGW1 ! boot-start-marker boot-end-marker ! logging buffered 99999999 debugging no logging console ! no aaa new-model ! resource policy ! clock timezone EST -5 clock summer-time DST recurring network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ip subnet-zero ! ! ip cef ! ! no ip domain lookup ip domain name dev.local.csst.qc.ca ip host mediaserver 10.11.38.166 ip host tts-en-us 10.11.38.166 ip host asr-en-us 10.11.38.166 ip host CVPPrimaryVXMLServer 10.11.38.166 isdn switch-type primary-ni carrier-id 6550 ! ! trunk group 1 carrier-id 6550 isdn supp-service tbct ! voice-card 0 no dspfarm ! ! voice rtp send-recv ! voice service pots ! voice service voip signaling forward unconditional h323 call start slow ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! ! ! ! ! ! ! ! ! http client cache memory pool 15000 http client cache memory file 500 http client cache refresh 864000 http client connection timeout 60 http client response timeout 30 ivr prompt memory 15000 ivr prompt streamed none ivr asr-server rtsp://asr-en-us/recognizer ivr tts-server rtsp://tts-en-us/synthesizer ! application service vru-leg flash:bootstrap.tcl paramspace english index 0 paramspace english language en paramspace english location flash paramspace english prefix en ! service new-call flash:bootstrap.vxml paramspace english language en paramspace english index 0 paramspace english location flash paramspace english prefix en ! service cvperror flash:cvperror.tcl paramspace english index 0 paramspace english language en paramspace english location flash paramspace english prefix en ! service CVPSelfService flash:CVPSelfServiceBootstrap.vxml paramspace english index 0 paramspace english language en paramspace english location flash paramspace english prefix en ! service takeback flash:survivability.tcl paramspace english language en paramspace english index 0 paramspace english location flash: paramspace english prefix en ! service WelcomeTBCT flash:CVPSelfService.tcl paramspace english index 0 paramspace english language en param CVPSelfService-port 7000 param CVPSelfService-app WelcomeTBCT paramspace english location flash: param CVPPrimaryVXMLServer 10.11.38.166 paramspace english prefix en ! service HelloWorld flash:CVPSelfService.tcl paramspace english language en paramspace english index 0 param CVPSelfService-port 7000 param CVPSelfService-app HelloWorld param CVPPrimaryVXMLServer 10.11.38.166 paramspace english location flash paramspace english prefix en ! service handoff flash:handoff.tcl paramspace english index 0 paramspace english language en paramspace english location flash ! ! controller T1 0/0/0 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-6,24 description TELUS PRI 55IPCD032711 ! ! ! interface Loopback0 ip address 192.168.1.2 255.255.255.0 ! interface FastEthernet0/0 description MONTREAL VOICE GATEWAY MODVCGW1 FE 0/0 ip address 10.11.38.162 255.255.255.0 duplex full speed 100 h323-gateway voip interface h323-gateway voip id SSDVCGK1 ipaddr 10.36.8.162 1719 h323-gateway voip h323-id modvcgw1 h323-gateway voip tech-prefix 2# h323-gateway voip bind srcaddr 10.11.38.162 no routing dynamic ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address isdn switch-type primary-ni isdn incoming-voice voice isdn supp-service tbct notify-on-clear trunk-group 1 no cdp enable ! ip classless ip route 10.0.0.0 255.0.0.0 10.11.38.1 ! ! ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip rtcp report interval 3000 ! access-list 23 permit 10.10.10.0 0.0.0.7 ! ! ! control-plane ! ! ! voice-port 0/0/0:23 ! ! ! ! dial-peer voice 2047 pots trunkgroup 1 service welcometbct destination-pattern 5145555555 incoming called-number 2047 carrier-id source 6550 carrier-id target 6550 direct-inward-dial ! gateway timer receive-rtp 1200 ! ! end
Posted on: 2007/6/12 23:04
|
|
Transfer
|
||
Re: how to configure TBCT |
||
|---|---|---|
|
Just popping in
![]()
Joined:
2007/2/23 14:41 Group:
Registered Users Posts:
4
Level : 1; EXP : 21
HP : 0 / 5 MP : 1 / 56 ![]() |
Found the answer by myself.
Posted on: 2007/7/29 14:17
|
|
Transfer
|
||
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
![how to configure TBCT [Forums - Gateway discussion]](http://ccvp.org/themes/cleanblue//images/logo.gif)


Transfer
